DAF Trucks at the 2015 RWM Exhibition

08-09-2015, DAF Trucks UK


RWM is Europe's premier event for resource efficiency and waste management solutions.

The exhibition takes place at the NEC in Birmingham from the 15th to 17th September 2015 and DAF will be there on stand 5T90. For more exhibition details and to pre-register for entry to the free show go to www.rwmexhibition.com

 

‘Strength in depth’ specialist vehicles from DAF Trucks

‘Strength in depth’– that’s the message from DAF Trucks at this year’s RWM Exhibition where the truck industry’s market leader is showing examples of specialist chassis from its lightweight LF and middleweight CF ranges.

With a large number of DAF trucks in evidence on exhibitors’ stands throughout the NEC, DAF Trucks highlights its diverse product line-up and its ability to produce exacting chassis specifications for niche market requirements. With such strength in depth, DAF Trucks also shows its capacity to work with an impressively wide range of the UK’s and Europe’s leading bodybuilder partners.

Heading up DAF Trucks’ stand is a Euro-6 CF 290 FAG; a 26-tonne 6x2 twin-steer rigid chassis fitted with Faun Zoeller’s21 cubic-metre ‘Variopress’refuse collection bodywork and kindly loaned by Luton Borough Council. The vehicle is part of a programmed delivery of 19 new Euro-6 DAF 26-tonners (including two FAN rear-steer models) for the Council’s waste collection and recycling service.

The truck is powered by a 10.8-litre, 290bhp Euro-6 PACCAR MX-11 engine coupled with a fully automatic Allison 3200 Series six-speed gearbox. A 5.35m wheelbase, a twin-steer axle configuration and an 11.5 tonne rear axle (and a 7.5 tonne steering axle) provides an ideal combination of manoeuvrability and weight distribution. The DAF Space Cab is converted by Estepe in the Netherlands and provides room for up to five crew (four plus driver).

Rear-end loader Variopress 21 cubic-metre capacity bodywork is manufactured and fitted by Faun Zoeller.‘Rotary 3’ bin lift equipment boasts a new low-level domestic lifter design, featuring a seven second cycle and active independent bump bar.

With rear-end weight distribution a focus for refuse collection operations, DAF Trucks’ FAG 6x2 twin-steer configuration offers both excellent payload and manoeuvrability to allow nimble handling on narrow streets and around complex housing estates. A twin-steer set-up also reduces damage to road surfaces where maximum lock is often employed. DAF Trucks FAN 6x2 rear-steer provides alternative operational benefits where even greater manoeuvrability is required.

DAF Trucks is also displaying a Euro-6 LF 220FA; a 16-tonne 4x2 rigid fitted with a ‘K-Maxi’ rear-end loader refuse collection body from Finnish manufacturer NTM. The vehicle is supplied courtesy of waste management specialist, Grundon and assumes pride-of-place at the entrance to the RWM exhibition. In operation the LF will be down plated to 15 tonne GVW.

The 3.8m wheelbase chassis is powered by a PACCAR Euro-6 PX-7 engine rated at 220bhp, and coupled with a five-speed Allison 3000 Series automatic gearbox.

The 12.6 cubic-metre capacity NTM K-Maxi body comprises an NTM Barlift and features pneumatic bin catcher bar, proportionally controlled hydraulic levers (for bin-lift, carriage plate and packer plate) and high-speed compaction.




Channel Commercials PLC Sevenoaks AFT